Stansted Abbotts Hertfordshire UK|
Plan was to renovate this boat to an all electric boat
(so NO ENGINE) but due to change in personal circumstances i want to hand this blank canvass over to someone for right price.
All ready for next stage of electrics and fit out.
Had over 12k's welding done for a wide side hatch, complete new stern hatch and a 3ft extension at the bow to inside cabin to make a 37ft space.
Very little welding done to structure of boat....just a 300 x 500mm square plate on mid section and 2 side plates on bow( you can see on bow pictures). So solid boat throughout.
Completely rust treated bilge and painted through out.
Exterior taken to bare metal and 3 coats of zinc primer applied throughout.
Engineering blue brick ballast through out hull with lots spare if needed.
Floor battened with treated hardwood and laid with 18mm thick marine Buffalo board.
sides and ceiling battened aswell and treated.
£3k spray foam insulation installed to a minimum of 2cm but 4cm in some places.
Custom fit 12 inch round port holes that was salvaged from a HMS vessel which is unique looks and works great.
Professional boat Survey (can provide if requested) done before and after work to hull which was a 500mm sq replating and 2 strips of plating on the bow you can see in the pic.
Underside of hull blackened but not sides.
No expense spared.
All Marine materials used.
Got plenty of pics to share with the serious buyer of the progress from scratch.
|Length over all:||15m|